News

Two PVC profiles may both include fiberglass mesh wings and still solve different problems. A standard corner bead establishes and protects an angle in plaster or render.

Rainwater can cling to an underside and run back toward a facade if a horizontal edge has no effective break. A PVC drip bead forms a projecting drip line that encourages water to detach at a chosen edge.

A bead that looks correct in a catalog can be unusable on site if its nose stands proud of the specified plaster, its mesh wings are too narrow to overlap the field reinforcement, or its length does not fit the reveals.

A straight edge is only one requirement for a durable plaster corner. The bead must fit the coating thickness, substrate, exposure, attachment method, and reinforcement detail. PVC avoids metallic rust staining and often integrates mesh wings into thin-coat render.

A procurement sheet that says “ETAG or ASTM fiberglass mesh” leaves a critical question unanswered: which test, and for which wall system?

Glass Fiber Mesh Manufacturing Process: From Raw Materials to High-Performance ReinforcementBehind Every Strong Mesh Is a Controlled Manufacturing Process.Glass fiber mesh is widely used for EIFS and ETICS systems, wall reinforcement, plastering, stucco, roofing, waterproofing, and construction appl